Bass traps

Each corner is going to be equipped with a 19 inch from each corner bass trap floor to ceiling, that later on you will see them filled up and packed with rock wool.
So here I needed 2 frames to work out for each bass trap, the first one to be fixed solid to the rest of the wall frames and the second one will be covered in loose material as a finish and will be fixed over the other by means of Velcro.

They consist of 2 inches by 1 inch less the plaining of the wood white wood PVA Glue and 4.5 x 50 screws.

The bass traps will be packed solid with 75 mm rock wool cut into triangles photos later on will show more into detail. Using 75 mm rock wool for each bass trap I will need a pack of 8 pieces each so total of 4 packs.




So here we go .... I needed a hand here either from someone or something to
hold my 45 degrees lengths of wood up in that angle so I could drill enough
space to berry the head of the screw, This is the best idea i could come with
at the time, it worked pretty well i could even have for in a row at one time.

The 8 mm bit, these kind of bits are awesome, when you drill a little hole the point of the bit creates a place where to put the screw in and holds by itself, very handy when you got only one set of hands.

Gluing and screwing the first frame together









Click on the photos enlarge